Rooflights and Skylights - Flushglaze Rooflight

Introduction
The Flushglaze fixed flat glass skylight can be tailored to meet many shapes and sizes from square, rectangular, triangular and a recently completed tear drop shaped Glazing Vision will identify and design the rooflight to meet your needs. The Flushglaze is a very low profile system based on car windscreen technology, the glass being structurally bonded and triple sealed making it ideal for flat roof applications on a pitch of only 3-5 degrees. This reduces water ponding and condensation risks to a minimum by the elimination of internal flashings and metal framework and can be installed on flat or sloped roof applications. The rooflight can be extended to any length like ribbon glazing by linking sections either with glass to glass silicone seals, back to back angles or glass fins. Opening sections can also be incorporated into the Flushglaze using our Visionvent rooflight Standard and bespoke sizes are available, stock rooflights are offered on a next day delivery basis.

Top

Features
No internal framework = Maximum daylight = Sky only views
Easy cleaning = low maintenance
Various Glass specifications catered for = High Thermal Performance
Double glazed with triple seals = Good solar performance and noise reduction
Soft Coat Low emmissivity coating = increased performance
Safety glass to both panes = meeting British standards
Guaranteed long life clarity (subject to 3 month cleaning intervals)
Simple installation by any DIY enthusiast

Top

Standard Sizes
1m x 1m, 1m x 1.5m, 1m x 2m
[only for standard Flushglaze (RAL 7015 outer framework) without any options below]

Top

Options
Walk-on specification
Special colours
Solar control and obscure finishes
Extended size range
Wall abutment
Ridge and Eaves applications
Fire Rated Flushglaze available

Top

Specifications
Max Width without intermediate frame support: 1500mm
Max Length in single pane: 3500mm
Max Length with multiple panes: unlimited
Max Module Length for continuous glazing: 3950mm
Minimum Size: 400mm
Butt joint width on multiple units: 10mm
Guide Weight (daylight spec only): 40kg / sq m
Guide Weight (Walk-On spec - subject to size): 75kg/sq m
Walk On Glass Specification: 21.5mm toughened laminated outer - 16mm cavity - 6mm low E inner

FLUSHGLAZE ROOFLIGHT
Drawing reference(s): S0001, [402/ASS/001]
Manufacturer and reference: Glazing Vision Ltd, 36 Wimbledon Avenue, Brandon, Suffolk, IP27 0NZ
Type: Flushglaze range
Glazing Details: 28mm Double glazed units comprising 6mm clear toughened outer pane, 16mm airspace and 6mm clear toughened low E inner pane. Units to have silicone edge seal.
Frame: Extruded aluminium cill profile, grade 6063 T6
Finish: Polyester Powder Coated.
Colour: White RAL9010 matt or RAL7015 matt as standard.
Kerb: 75mm wide up-stand to all sides as manufacturers recommendation. Minimum 3 degrees fall.
Other requirements: Frameless design with glass to glass joints. External glazing surfaces to be flush with no flashings or water ponding obstructions/dirt traps on the glass surface

FLUSHGLAZE WALK ON ROOFLIGHT
Drawing reference(s): S0001, [402/ASS/003]
Manufacturer and reference: Glazing Vision Ltd, 36 Wimbledon Avenue, Brandon, Suffolk, IP27 0NZ
Type: Flushglaze Walk on range
Glazing Details: 43.5mm Double glazed units comprising 21.5mm clear toughened laminated outer pane, 16mm airspace and 6mm clear toughened low E inner pane. Units to have silicone edge seal.
Frame: Extruded aluminium cill profile, grade 6063 T6
Finish: Polyester Powder Coated.
Colour: White RAL9010 matt or RAL7015 matt as standard.
Kerb: 75mm wide up-stand to all sides as manufacturers recommendation. Minimum 3 degrees fall.
Other requirements: External glazing surfaces to be flush with no flashings or water ponding obstructions/dirt traps on the glass surface

Top

Installation
Installation onto prepared roof apertures and up-stands is simple, each rooflight is supplied assembled, packaged with instructions and fitting kit. Either follow our detailed assembly instructions, or opt for an installation service. All standard sizes are factory pre-assembled and delivered in one completed unit, units over 4m length supplied in sections for on site assembly and sealing of the joint line. An on site lifting facility will be required to locate the heavier units to the roof location. Walk-On specification glass roofs invariably require lifting assistance.

Top

Price and Delivery Guide
Please refer to our Online Quote Generator. Special colours £250 per rooflight. For applications where the rooflight abuts a wall or have bespoke requirements (shapes). Please contact our sales team on 01842 815581 or sales@glazing-vision.co.uk for a delivery and installation cost.

Delivery times for standard sizes are typically ex-stock, bespoke sizes/colours 4/6 weeks subject to circumstances. Prices are guide only, please submit your enquiry for a firm fixed price.

Please remember when requesting a quote, specify the outside dimensions of the opening/kerb, you should then make an allowance of approximately 150mm for inside dimensions subject to chosen internal finishes dimension.

Top

Resources

Product Brochure

CAD Drawings [For registered users only]

Get a quote
With our Online Quote Generator

National Building Specifications (NBS)
MS Word Format
Plain text format

Walk on Flushglaze indoors