Roof terrace access rooflight range - Jupiter
Due to the popularity of our roof terrace access rooflights, the designers at Glazing Vision have developed a design principle which can be used to offer a standard solution in both a free standing box rooflight or a 3 wall mounted version. Using these design principles cost and lead time reductions can be passed onto the customer.
The Sliding box rooflights are a great option for terraced access as it offers a physical structure and the fixed walls of glass provide a balustrade around the opening. It also allows you to continue your handrail right up to the point of leaving the box and stepping onto the roof terrace. The box rooflight consists of two sections, one fixed section and one sliding section. The sliding section slides over the fixed section to create 50% clear opening thus allowing the user to walk through and out of the rooflight. All the glass used is flush to allow water run off and easy cleaning, whilst maintaining maximum security.
All Glazing Vision sliding rooflights are low-noise in operation and have built in electronic solid-state controls with battery back-up, manual override, speed control and creep-speed sealing at end of travel as standard. Units are factory pre-assembled and tested, usually craned into position, fitted and commissioned within a day.
In operation...
The rooflight is opened electrically, operated by a rocker switch positioned at the discretion of the client. It includes a ‘one touch’ facility, where the switch is pressed then released leaving the rooflight to open automatically. If you wish the unit to stop, press close once. If you wish to have the unit only open a certain amount, you can keep the switch pressed until this point is reached.
Jupiter, Free Standing Box Technical Data
Customer DIMS to be the outside kerb dimension
Pitch Angle Range: Flat Roof applications
Maximum Height: 1500mm
Maximum Span: 2400mm
Maximum Length: Dependant on span, up to the max footprint below
Max footprint area: 6m2
Speed of operation: 2-3m/min (variable) – Can be set if installed by Glazing Vision
Framework: Aluminium
Finish: Polyester Powder Coated Frame
Colour: White RAL9010 matt and Grey RAL7015 matt
Glazing: Double glazed, safety glass
Standard Glass U-Value: 1.1 w/m2 K Centre Pane U-Value
Drive Voltage: 12 or 24 Volt DC
Supply Voltage: 220/240 volt AC
Larger sizes can be manufactured however these will be on an OR special project basis and will have longer lead times.
28mm DGU Comprising of: 6mm clear toughened outer, 16mm gas filled, black, silicone sealed spacer, 6mm clear lowE toughened inner
Jupiter, 3 Sided Wall Mounted Box Technical Data
Customer DIMS: Inside supporting walls and to the outside of front edge kerb
Pitch Angle Range: Flat Roof applications
Maximum Height: 1500mm
Maximum Span: 2400mm
Maximum Length: Dependant on span, up to the max footprint below
Max footprint area: 6m2 dependant on span
Speed of operation: 2-3m/min (variable) – Can be set if installed by Glazing Vision
Framework: Aluminium
Finish: Polyester Powder Coated
Frame Colour: White RAL9010 matt and Grey RAL7015 matt
Glazing: Double glazed, safety glass
Standard Glass U-Value: 1.1 w/m2 K Centre Pane U-Value
Drive Voltage: 12 or 24 Volt DC
Supply Voltage: 220/240 volt AC
Larger sizes can be manufactured however these will be on OR special project basis and will have longer lead times
28mm DGU Comprising of: 6mm clear toughened outer, 16mm gas filled, black, silicone sealed spacer, 6mm clear lowE toughened inner .
The unit requires 3 structurally sound walls to support the unit and a flat level fully weathered stepped kerb along the front exit edge only. Different colours available at extra cost.
50% clear opening, optional extras include rain sensor with override switch, remote control, photoelectric safe edge sensor, solenoid locks, variable opening speeds, and one touch opening. These standard units will also have a lead-time of 6-10 weeks and reduced cost due to savings in design time. The product is suitable for regular roof access.
Installation
Installation onto prepared roof apertures and up-stands is simple, each rooflight is supplied assembled, packaged with instructions and fitting kit. Either follow our detailed assembly instructions, or opt for an installation.
Top
Price and Delivery Guide
Please use the Online Quote Generator. For special colours please add £250 per rooflight. Delivery times for standard sizes are typically 8-10 weeks subject to circumstances. Prices are guide only, please submit your enquiry for a firm fixed price. Please phone our sales team on 01842 815581 for a delivery and installation cost.
Please remember when requesting a quote specify the outside dimensions of the upstand/kerb, you should then make an allowance of approximately 200mm for inside dimensions subject to chosen internal finishes dimension. |